Lectrosonics D4 System Manual de usuario descargar pdf (Pagina 10)

D4T/D4R

LECTROSONICS, INC.

Receiver

General Settings

Tuning Selection

Use UP/DOWN

arrows to select

menu item and

press FUNC to

enter setup

Use UP/DOWN

arrows to select

frequency, then

press FUNC to

return to menu

Audio Level

Use UP/DOWN

arrows to select

menu item and

press FUNC to

enter setup

NOTE: The setup screens for audio level will

bedifferentdependingupontheAES3Mode

selected. See the next page for details.

Calibration Tone

A steady tone at the maximum level before clipping

can be turned on at each output to allow accurate

inputleveladjustmentoftheattachedmixer,recorder

or other connected equipment.

While the tone level is always the maximum before

clipping,theaudiooutputlevelmaybeadjustedonany

analogoutput.Anyadjustmentsmadetotheanalog

output levels here are automatically applied to the

audio level setup screen as well.

The Calib. Tone menu item accesses a setup screen

which looks and operates the same way as the audio

level setup screen. The difference is that a 1 kHz tone

is produced at all outputs at the level shown.

Use UP/DOWN

arrows to select

menu item and

press FUNC to

enter setup

1 2 3 4

Press the button under the analog channel

to be adjusted and then use the UP and

DOWN buttons to set the desired level.

AES3 Modes

Use UP/DOWN

arrows to select

menu item and

press FUNC to

enter setup

Use UP/DOWN

buttons to select

desired mode

2/4 Channel Modes

Use UP/DOWN

arrows to select

menu item and

press FUNC to

enter setup

Use UP/DOWN

buttons to select

desired mode

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comentarios a estos manuales

Sin comentarios

Lectrosonics D4 System Manual de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Lectrosonics D4 System