Lectrosonics UCR195 Manual de usuario

UCR 195 COMPACT UHF RECEIVER OPERATING INSTRUCTIONS and troubleshooting guide LECTROSONICS, INC. Rio Rancho, NM

ANTENNA USE AND PLACEMENT Position the antenna so that it is more than 3 or 4 feet from large metal surfaces. If this is not possible, try to positi

Compact UHF Receiver OPERATING INSTRUCTIONS 1. Connect the power cord or install the batteries. 2. Attach the antenna. 3. Connect the audio ca

TROUBLESHOOTING POWER SUPPLY AND FUSE LEDs not lit or dimly lit • AC power cord disconnected. • External power supply disconnected or inadequate

Compact UHF Receiver SERVICE AND REPAIR If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that th

SPECIFICATIONS AND FEATURES Receiver Operating Frequencies: 470 to 608 MHz, crystal controlled Receiver Type: Dual conversion, superheterodyne Fr

Compact UHF Receiver15Rio Rancho, NM USA–

LIMITED ONE YEAR WARRANTYThe equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was pur

2

Compact UHF Receiver3Rio Rancho, NM – USATable of Contents INTRODUCTION TO THE 195 SYSTEM ... 4 GENERA

INTRODUCTION TO THE 195 SYSTEM The 195 Series system was designed for the most critical studio and sound reinforcement applications. The system desi

Compact UHF Receiver NO PRE-EMPHASIS/DE-EMPHASIS The signal to noise ratio of the 195 system is high enough to preclude the need for conventional pre-

GENERAL TECHNICAL DESCRIPTION UCR195 RECEIVER The UCR195 is a high performance, dual-conversion, UHF receiver. The RF performance is extremely stab

Compact UHF Receiver The UCR195 detector basically works like this: A stream of DC pulses is generated at 455kHz. The pulse width is constant, but t

-FRONT PANEL CONTROLS AND FUNCTIONS PWR LED When lit, this LED indicates that power is applied to the UCR195 and adequate voltage is present to oper

Compact UHF Receiver REAR PANEL CONTROLS AND FUNCTIONS EXTERNAL POWER JACK The UCR195 can be powered from external 12 to 18 Volts DC applied directl